|
Results 1 - 6 from 6 for scum baffle in 0.322 sec.
NEFCO, Inc. - Providing low cost solutions to expensive problems.
There are two basic configurations. The first is the Tank Wall Configuration where the Mounting ... has taken this design one step further and offers the Weir Wall configuration with integral scum baffle. There is also a NEFCO Launder Cover System designed for radial troughs or situations where ...
nefcoinc.com
NEFCO, Inc. - Providing low cost solutions to expensive problems.
For additional rigidity, a 12" scum baffle with ¾" return flanges at the top and bottom is available. Scum baffles are supplied complete with splice plates, scum baffle brackets and all of the required stainless steel anchors and fasteners. Several types of baffle brackets are available ...
nefcoinc.com
More from this site
Pollution Control Systems, Inc. :: Circular Mechanical Clarifiers
This configuration provides for maximum settling of solids toward the sludge pick-up. ... the scum baffle. Circular Peripheral Flow (Shown with Concrete Tank) Flow enters at the periphery, where it is evenly distributed and spiraled downward around the annulus by means of the specially designed baffle ...
pollutioncontrolsystem.com
MicroSepTec - Homeowners - Conventional vs. MicroSepTec
There, solids settle out and grease and scum float to the top. The septic tank separates and retains settleable ... and other light materials float to the top to form a scum layer. The removed solids are stored in the tank, where they ... three years depending on the usage of the system. The first baffle is structurally reinforced to be able to withstand the hydraulic pressure ...
microseptec.com
MicroSepTec - Realtors - Conventional vs. MicroSepTec
There, solids settle out and grease and scum float to the top. The septic tank separates and retains settleable ... and other light materials float to the top to form a scum layer. The removed solids are stored in the tank, where they ... three years depending on the usage of the system. The first baffle is structurally reinforced to be able to withstand the hydraulic pressure ...
microseptec.com
More from this site
Rideau Canal Waterway - Septic Systems
Lighter particles form a scum at the top. This process leaves a middle layer of partially clarified water. An outlet baffle in the tank is positioned to allow only this middle water layer out of the tank and into the septic bed. Both the sludge and the scum stay inside ...
www.rideau-info.com
The results are filtered
View all results for scum baffle
|
