earthplatform.com

Results 1 - 10 from 20 for measurement interval in 0.283 sec.

Welcome to the VSI Environmental Web Site
The following conditions shall be complied with during closed-building conditions: i) Normal operation of permanently installed energy recovery ventilators may continue during closed-building conditions. Radon Measurement ...
www.radongas.com

... each indicator, including the scale at which the indicator is intended to be applied, the measurement interval, the unit of measure and the source of the data used to measure the indicator ...
modelforest.net

OTT CBS - Surface Water Level Sensors - HACH ENVIRONMENTAL
Max rate of level change: 3 ft/min Output: SDI-12 4-20 mA Power supply: 10-30 V DC Power consumption: 15 min. measurement interval 25 mAh/day 1 min. measurement interval 320 mAh/day Compatible tubing: 1 ...
hydrolab.com

Specs - OTT LogoSens DataLogger - OTT DataLogger - HACH ENVIRONMENTAL
V) active, taking measurements approx. 50 mA (max. 1 min. per sensor and measurement interval) active, no measurements approx. 30 mA sleep, special inputs active approx. 1.5 mA sleep ...
hydrolab.com More from this site

MDAG Case Study 11
(Morin and Hutt, 1993; Morin et al., 1994). The first pH measurement below 6.0 at NDD was obtained in late 1987. This and other peaks of ... flushed accumulated acidity from the rock (Morin et al., 1994). Through 1994, the annual time interval of acidic pH (less than 6.0) increased at NDD and sulphate concentrations showed a ...
www.mdag.com

BYU MERS SeaWinds/QuikScat Enhanced Resolution Product FAQ
The effective resolution depends on the sampling and time interval and is coarser than this, typically by about a factor ... measurement). A particular measurement z_i can be written as z_i = Integral h_i(x,y) dx dy + noise where h_i(x,y) is the measurement response function (due, for example, to the antenna pattern and the Doppler filter response) of the i-th measurement. For ...
www.scp.byu.edu

GENERAL PROGRAM SETUP
APPLICATION RECORDS: THESE ARE THE DEFAULTS THAT SHOW UP ON THE APPLICATION RECORD (WORK ORDER), mEASUREMENT LOG AND pURCHASE RECORDS: determines how the program handles various input items and record display ... Family o. Toxicity (ex: Warning, Danger, etc.) p. Reentry Level (ex: 12 hours) q. Harvest Interval is 0 r. In the Crop Grid for each crop that the material is to ...
www.orangesoftware.com

Terms Beginning With "I"
A device that indicates the result of a measurement; e.g. a pressure gauge or a moveable scale. Indirect Discharge: Introduction of pollutants from ... . Infiltration Rate: The quantity of water that can enter the soil in a specified time interval. Inflow: Entry of extraneous rain water into a sewer system from sources other than infiltration ...
epa.gov

Teledyne Monitor Labs, Inc. LightHawk 560 Opacity / Dust Monitor
Power Supply Stack Temperature, °C Stack Pressure, kPa F Bank (Fundamental Parameter Bank) Measurement Unit (Opacity,Op.Density, Mass Time, Date, Year Audit Marker – algorithm to conduct ... Parameter Bank) Cal Setpoints Dust Comp Tolerance Calibration Tolerance Hour/Minute of Calibration Interval Between Calibration Seconds of Zero, Upscale, PLCF, & Dust Comp (In Calibration Automatic Daily ...
monitorlabs.com

Orange Enterprises, Inc.: Software: Tiger Jill: What's New!
"Included in Lookups" to the Measurement Location screen. 3. Added an option to the Preference Default Tab to specify default measurement type in the application record measurement tab. 4. With Split ... the program displays a "Repeat Application" specification screen. In this screen the user enters the Interval between the applications and the number of repetitions. When the user clicks on the ...
orangesoftware.com