|
Results 1 - 10 from 167 for injection process in 0.254 sec.
Ozone
Ozone is fed into the pool feed water prior to the chlorine injection process. Ozone destroys many organic compounds and microorganisms that would typically react with chlorine, resulting in ... in the tank is approximately 5 - 10 minutes. The water is sent through a filtering process, chlorinated, and returned to the pool. It is expected that a reduction of chlorine use ...
flasolar.com
ASPO the Association for the Study of Peak Oil
SAGD (Steam Assisted Gravity Drainage). Despite the higher recovery expected from this emerging process, the huge amount of energy required results in ...
peakoil.net
Case Study - Steam Enhanced Creosote Pumping
Acquisition Case Study - Steam Enhanced Creosote Pumping HammerHead Pumps Integral to Innovative Steam Injection Process Used to Clean Up DOE Facility in Ohio SteamTech Inc. of Bakersfield, California, ... and chose the steam injection process developed by SteamTech in conjunction with individuals associated with the University of California, Berkeley. The DOE is evaluating the process on a small ...
qedenv.com
Progressive Environmental Co. | Ozone
Ozonization is the technological process whereby ozone, a natural but more highly activated form of oxygen, is injected into ... generated on-site. Ozone cannot be stored and must be generated at the point of injection, thereby removing the dangers associated with handling and maintaining hazardous substances. Ozone has been ...
www.proenv.com
Mr. Campbell's Summary of Experience
These projects provided the early ... hydrochemical behavior in the leach-pad complex, and for providing data for optimizing process control, as well as for regulatory monitoring purposes. During the mid-1980's, ...
www.ela-iet.com
In-Situ Fixation, Inc. - deep soil mixing, contaminated soil, soil remediation, solidification stabilization, thermally enhanced soil vapor extraction, steam iron injection, bioremediation, insitu, in-situ, in situ, auger mixing, dual auger, double auger,
If during the installation process the contaminants present in the soil have a tendency to become airborne (i. ...
www.insitufixation.com
Self-cleaning Water Filters and Automatic Water Filters
Nozzle Protection, Air Compressor Protection, I.E. & R.O. Prefiltration, Filter Backwash Reclaim, Process Cooling Water, Deep Well Injection, Sludge Reclaim, Make-Up Water, Waste Water, H.V.A.C., Pasteurizers, Potable ...
orival.com
Terms Beginning With "I"
Pollution Prevention: Combination of industrial source reduction and toxic chemical use substitution. Industrial Process Waste: Residues produced during manufacturing operations. Industrial Sludge: Semi-liquid residue or ... as waste disposal, improving the recovery of crude oil, or solution mining. Injection Zone: A geological formation receiving fluids through a well. Innovative Technologies: New ...
epa.gov
BIOMINET Proceedings : Mining Effluent Technologies
BIOMINET 9th Annual Meeting August 26, 1992 Development of the biosulphide process (D. Warkentin) Development of an industrial process for oxalate biodegradation (L. Beaudette et. al.) Heterotroph layering ... . al.) Monitoring the response of oil field production water microbial communities to nitrate injection with reverse sample genome probing (A.J. Telang et. al.) Biodegradation of ...
www.nrcan.gc.ca
OR-TEC Blend Process
OR-TEC Blend Process The OR-TEC BLEND 500P/750P series emulsion polymer dosing system is used extensively in ... then passed through an injection block. Emulsion polymer is drawn from its container and injected through the injection block by a metering pump. High water velocities through the injection block instantly activate the ...
www.or-tec.com
The results are filtered
View all results for injection process
|
